MSGC GROUP Co., Ltd is one of the most experienced manufacturers and suppliers of aluminum profiles online quenching tank in China. Welcome to wholesale custom made aluminum profiles online quenching tank at competitive price from our factory. Contact us for more cheap products.
Aluminum profiles online quenching tank suitable for use with aluminum profiles with a maximum width of 480mm and a maximum height of 350mm for profile design. The online quenching system device is equipped with air cooling and high-pressure spray water cooling
Mist cooling/super cooling function, air cooling is regulated by a frequency converter; Water cooling adopts a two-stage regulation consisting of a frequency converter and a flow control valve. The total length of the system installation occupies about 15 meters. Front section 8m air-cooled
High pressure spray water mist cooling/super cooling overlaps together. The effective cooling length of air cooling is 8+6 meters; The device is divided into two parts, the upper air box can be raised and lowered; Fixed lower air duct, front roller
The frame can be lifted and lowered, the rear roller frame is fixed, and the discharge platform can be adjusted by lifting and lowering; The single-sided swing height is 200mm.
- Aluminum profiles section with a maximum specification of 480 width x 350 height
- Cooling table height: 850mm~900mm
- Aluminum extrusion press center height: 1100-1150mm
- Cooling effect: Fully air-cooled, aluminum profiles with wall thickness (thickest part) below 7mm, reduced to below 200 ° C after 60 seconds in the quenching zone; Wind mist cooling, aluminum profiles with wall thickness between 7mm and 10mm, reduced to below 100 ° C after 60 seconds in the quenching zone; High pressure spray, solid profile with a diameter of 100mm, reduced to below 35 ° after passing through the quenching zone for 60 seconds.
